EeZeBilt 50 PT Boat

georgeo5664 #2 of 2 12 lat temu

This is my very first boat I have ever built. I have choose this boat because it has a nice look about it.
it might be easy but for my first build I wanted to understand the different parts to a boat and how things go together.

Polubione przez georgeo5664

georgeo5664 Post otwierający 11 lat temu

EeZeBilt 50 PT Boat

Just managed to get the hull ready next step the top any advice on what motor and prop / prop shaft would be ok running in this boat the boat it about 30" long any help would be appreciated

13 komentarzs

DodgyGeezer
Porucznik11 lat temu
No trouble. I hope it should be easy to skin the hull, and the basic superstructure isn't very complicated.

Install the propshaft and motor, with its connector, while the hull in unskinned.

Then do the bottom of the hull, and install the rudder, the shelf and servo. At that stage you should be able to set up your radio and make the motor run and the servo turn.

Then skin the hull sides. You do those last because working on the rudder will be difficult when they are on!

Good luck...
Lubię to
georgeo5664
Starszy bosman 1 klasy11 lat temu
Dodgygeezer I have been looking at the build log and you are right I have removed and reinstalled the stern to touch the back of the deck thanks for you observation it looks a lot better now. 😀
Lubię to

Zaloguj się to comment on this update.

MODEL BOATS WEBSITE

EeZeBilt 50 PT Boat

Obserwujący (2)

EeZeBilt 50 PT Boat

EeZeBilt 50 PT Boat