speedline 1/12 tamar

Autor peep31 5 zgłoszenia 10 mar 2013 — 27 maj 2013

0Polubienia

13Komentarze

Rozdział 02 / 05

Rozdziały · 5 · przewiń, aby przeczytać

peep31 #2 of 5 14 lat temu

this is my new build I hope to have done by the spring.fantastic kit from speedline,loads and loads to build and put together

peep31 #3 of 5 14 lat temu

tamar

just painted the cabin and added a few more bits,comming on well

peep31 #4 of 5 14 lat temu

just starting to spray the deck and hull ,so far all looks good.dont know if I should spray the bottom white or red? any advice from anyone

2 komentarzs

Gregg
Porucznik podporucznik14 lat temu
the main reason for the "antI fouling" paint [and its colour] was because the baot it was applied to was stationed in sea water and moored in the water. Any boat either returned to slipway or trailer was painted white as it was not necessary for the hull to retain antI fouling paint as the boat was not kept in water.

It all depends on your specific boat and where it is/was stationed. if its a slipway station , then it keeps the white hull.
Lubię to
flundle
Able Seaman14 lat temu
It is traditional to paint the lower half of slipway launched boats white. When the Tamar was introduced the lower half was antI fouling red ( almost shocking pink). Cromer's boat (16-05) was changed from red to white. Barrow's boat was the first one to go on station with a white hull.
Lubię to

Zaloguj się to comment on this update.

peep31 #5 of 5 14 lat temu

fendering and linning added

peep31 Post otwierający 14 lat temu

nearly at the end of the build,just finished the Y BOAT for the transom bay looks nice.sea trials next can't wait to see how It performs