Realizacje autorstwa hammer

9 blogs

Totnes Castle 1894

autor hammerGB

I have posted this on another site, but will continue here if there is interest. I have a plan taken from a book some time ago. Drawn my …

Ketch Irene

autor hammerGB

Irene still sailing but very much altered, as she burnt down to the water line. My model will be as in 1930s. Built 1909 in Bridgwater, m…

Clinker boats

autor hammerGB

Just making another clinker boat, a commission. This is the method I have devised to space the planks. Wrap a strip of paper around the f…

Miniature hinges

autor hammerGB

Managed to find a photo of the hinges at the construction time of the Duke.

espania IV

autor hammerGB

As this is a static model I wanted to curve the sails, as though the wind was blowing. First stage soak cord in white glue over night. Pi…

plating

autor hammerGB

Pic 1 my riveting tool. Just a block of wood with a row of panel pins. They must be the self punching type. pointed head not flat. The cl…

Spliting a paddler.

autor hammerGB

Chris, I hope the pictures will help. They are both scale models Duke of Devonshire & Glen Usk. In the Duke the paddle box Is below the b…

Duke of Devonshire.

autor hammerGB

Making a double pulley. Drill 1.5mm In a thin sheet of aluminium Put a brass side on a panel pin followed by a alI sheave then the alI sh…

full size trawler

autor hammerGB

Note the double coach screws to hold against the twist. The three top planks oak the others pitch pine. Knights head & bitts. Deck beams …

Delete this post?

Zostanie usunięte z serwisu.

Odrzucić tę wersję roboczą?

Twój szkic zostanie usunięty i nie można go odzyskać.

Masz niedokończony szkic

Co chcesz z tym zrobić?