Mini Steam/Smoke Generator from Denes Design

Rozpoczęte przez Dainesh
7 odpowies 22 lubis Ostatnia aktywność: 3 lat temu
#8 1

Mini Steam/Smoke Generator from Denes Design

And this is the article from the Modelboats Magazine
Polubione przez Len1
#7 1

Mini Steam/Smoke Generator from Denes Design

One of my friend challenged me.
This is the result 😁😂😁
Polubione przez Len1 and Peejay and
#6 1

Mini Steam/Smoke Generator from Denes Design

I just connected 5 units in daisy chain plus a servo.
Seems OK 😊

Polubione przez Len1 and Scratchbuilder and
#5 1

Mini Steam/Smoke Generator from Denes Design

Hi Gents,

Here is the 3rd video.
I think it is worth to watch all 3.

The amount of the mist is pretty impressive plus there is a modulation of the puff-ing frequency and the strength.

Polubione przez Len1 and Scratchbuilder and
#4 1

Mini Steam/Smoke Generator from Denes Design

Dear Gents,

Here is another video about the Mini Smoke Unit:


This unit has two different modes:
- Standalone
- From Radio Controller

It is able to do the same as the other units with fan etc...
Working voltage range is: 4.6V to 15V (preferred: 5V to 14V)
Current consumption is 150mA.
Polubione przez Len1 and Mike Stoney and
#3 1

Mini Steam/Smoke Generator from Denes Design

Hi Fred,

The size is:
506070mm
It is 70mm high, but the water tank is 35mm plus the funnel holder is another 35mm.

But it can be smaller 😊
The fnnel size is 12mm OD and 10mm ID 125mm long plastic tube.

Regards
Denes
Polubione przez Len1 and Fred and
#2 1

Mini Steam/Smoke Generator from Denes Design

Hi Dainesh
Could I ask what is the size of the unit and cost?
Thanking you for your help
Fred
That's all right, Mr Ryan. My Morse is so rusty, I could be sending him dimensions on Playmate of the Month.
Polubione przez Len1
#1 1

Mini Steam/Smoke Generator from Denes Design

Here you can find a nice video 😊



😍
Polubione przez Len1 and Mike Stoney and

Zaloguj się dodać do tego wątku.

Delete this post?

Zostanie usunięte z serwisu.

Odrzucić tę wersję roboczą?

Twój szkic zostanie usunięty i nie można go odzyskać.

Masz niedokończony szkic

Co chcesz z tym zrobić?