Zdjęcia i filmy

RedRider

Starszy bosman 1 klasy 8 lat temu

1 / 14

Commission 44347

This is a Dumas kit for a USCG Life boat 44' built in Curtis Bay Maryland Coast Guard yard. I've been working off and on this model for a couple of years.

#boat yard #model #kit #dumas #e bay #us coast guard #dumas kit #built

Polubione przez Inkoust and doghouse and

1 komentarz

ibobideRekrutuj8 lat temu
I also have the same model, i struggled a bit with the balsa planking but eventually managed it. I was never happy with my UK version of the upperworks so ive since stripped it all down & am basically starting all over again but with the hull intact
Lubię to 1
Polubione przez figtree7nts

f4u7

Rekrutuj 8 lat temu

1 / 7

Vickers Vedette 1/96 scale

Scratch built from a 1975 free plan, hull is balsa frames sheeted with basswood and covered with 3/4 oz fibreglass cloth, superstructure is styrene sheet, missile launcher from balsa block, forward bofors torpedo launcher from styrene sheet and wood dowl, photo etch ladders, white metal handrail stanchions, other fittings are brass and resin, lw-02 radar and directors are from shape ways rudders and stabilizers are balsa block, you get the idea.

Polubione przez bilge rat and reilly4 and

2 komentarzs

GlynRekrutuj8 lat temu
A very nice execution of the old Model Boats free plan. I still have those plans (somewhat tatty after all these years) as well as the MB magazine they came with. How does she sail? Best regards, Glyn
Lubię to 1
Polubione przez teejay
f4u7Rekrutuj8 lat temu
Many thanks for your kind words, I've not sailed her yet, only test tank and had to up the water line a little bit for more stability, I also scaled up the plans to true 1/96 as the plan is around 1/100, the 1/96 fittings I bought from fleetscale were out of scale to the plan, and using the 1.1 water line length noted in the magazine article.
Lubię to 1
Polubione przez Donnieboy

lesliebreame

Starszy bosman 1 klasy 8 lat temu

Clyde Puffer

Clyde Puffer project showing new water filling pump and electronic level control as yet untested !! Fingers crossed !!

#clyde puffer #show #water pump #clyde

Polubione przez suntugs and Ray and

7 komentarzs

RNinMunichAdmirał floty8 lat temu
You're dead right there Leslie,
First we have to get the damn things to DO the work, and do it RIGHT!

The department printer would always go kaputt on Friday evening when I wanted to print a 130 page system description and the courier was stamping up and down outside 😡
"Brave New World" !!
Cheers, Doug 😎
Lubię to
RedRiderStarszy bosman 1 klasy8 lat temu
Wow! What a neat looking collection of "puffer" parts and the ingenuity to assemble it all. Beautiful Mate!
Lubię to 1
Polubione przez Donnieboy

reilly4

Sierżant sztabowy 8 lat temu

Steam Boats

For those interested in Steam powered boats.
A compilation of live steam boats in action at the Surrey Park Model Boat Club in Melbourne, Australia

#club #steam #model #power boat #steam boat #action #boat club #model boat club

Polubione przez Brightwork and suntugs and

3 komentarzs

schuffelsAble Seaman8 lat temu
Envy Jane belongs to my granddaughter Evy Jane.
It is sailed regularly at the Surrey park Dive, which is an old quarry in the city of Box Hill in Victoria Australia. We have a great facility and club house with approximately 130 members, we welcome new members and visitors and meet Sundays and Wednesdays.
Lubię to 1
Polubione przez reilly4
schuffelsAble Seaman8 lat temu
Got very exited to see my boat and misspelt the name of the boat and granddaughters name it is Evie Jane.
Lubię to 1
Polubione przez reilly4

colindavies

Starszy marynarz 8 lat temu

1 / 5

Mk2 RTTL 2771

Upgraded to Brushless 2x1100kva Turnigy motors, Scratch built 1/24 scale. I've included a photo of a real one, just in case somebody else tells me the colour scheme is wrong, East of Gibralta they where white. I'm sitting on the engine hatch nearest the camera, that was 1969

#motor #engine #turnigy #scratch scratch #brushless motor #brush #brushless #rttl 2771 #camera #built

Polubione przez Brightwork and jbkiwi and

4 komentarzs

colindaviesStarszy marynarz8 lat temu
Their replacements the MK3 RTTL were not a popular as the MK 2, Here is a picture of the real 2771 and my model Mk3 HMAFV Stirling
Lubię to 1
Polubione przez Donnieboy
chiffsStarszy bosman 2 klasy8 lat temu
Stunning job well done
Lubię to 1
Polubione przez Brightwork

jacko

Dowódca 8 lat temu

1 / 3

Victoria

still looking for information but Bill Daniels design from about 1906 (plans available ) till 1951. built to the 10 Rater rule..???

#plans #built

Polubione przez Northumbrian and jfstoker

CB90

Kapitan 8 lat temu

1 / 4

Norfolk Wherry

Some pictures of my Dad's Norfolk Wherry seen here at Eton Park, Norwich. it will be featured in September 2018 "Model Boats" magazine along with his mates Wherry.
It is about 4ft long note my 3ft 72nd scale Corvette looks small next to it.

#model #model boats magazine #corvette #norfolk #norfolk wherry

Polubione przez philcaretaker and Brightwork and

2 komentarzs

kmbcsecretarySierżant sztabowy8 lat temu
Stunning model, I'm looking forward to getting around to building mine.
Lubię to
thelegosStarszy marynarz8 lat temu
Very nice indeed, it looks like 'Albion",which I had the pleasure of looking around at Oulton Broad; it's an excellent model. I also bought a set of plans from the preservation society so it seems we'll have the makings of a fleet soon!
Lubię to 1
Polubione przez Donnieboy

Donnieboy

Sierżant sztabowy 8 lat temu

1 / 23

Fun Run

Enjoyable day.Light rain but lovely weather.Members from Kawartha Marine Modellers,Confederation Marine Modellers and Metro Marine Modellers attended.Wide variety of boats.Had BBQ afterwards.There is a couple of pictures of Springer tugs for people to have an idea what to do to theirs.

#model boats #model #members #modeller #tugs #tug #weather #springer

Polubione przez jacko and Ronald and

2 komentarzs

RonaldAdmirał floty8 lat temu
The Dumas kit (Carol Moran) mine is named Michael after my grandson. it sailed at a scale speed today.

The Bunker and Ellis "Lobster Yacht" a Midwest kit, seen here towing a harbour tender.

Harbour tender and Tugboat built by me. Dannieboy built the Lobster Yacht with added touches by Ron.
Lubię to 2
Polubione przez figtree7nts and Donnieboy
RNinMunichAdmirał floty8 lat temu
A magnificent collection! Well done gents 👍👍👍
Specially like the Victorian Launch 😊
Poor little girl, adrift on a runaway launch wiv no crew!!!! 😲
Hope one of the Springers could rescue her.
Congrats all round,
Cheers, Doug 😎
Lubię to 1
Polubione przez suntugs

figtree7nts

Admirał 8 lat temu

Tugboat Brooklyn!

I had to test Tugboat Brooklyn's Smoke Generator!
The next thing to get is a steam Whistle!

#steam #tugboat #tug #smoke

Polubione przez Brightwork and Helineil and

3 komentarzs

figtree7ntsAdmirał8 lat temu
Eventually, I'll work my way up to Live Steam!
Lubię to
RNinMunichAdmirał floty8 lat temu
We should live so long Ed 😉
I may have the machines necessary to make a steam engine, but I sure don't have the expertise necessary🤔, like Hammer 👍 for instance does have! Anyone out there making mini marine diesels????
Cheers, Doug 😎
Lubię to 1
Polubione przez figtree7nts

Krampus

Sierżant sztabowy 8 lat temu

1 / 27

IG Offshore Austria Outing

Greetings! Here I have some pics I took at the IG Offshore Austria outing held at St. Konrad, Austria (near Salzburg) on 31 May 2018. Nice event which turned with better participation than expected.

Polubione przez Rookysailor and Brightwork and

2 komentarzs

RNinMunichAdmirał floty8 lat temu
Hi Braulio,
Some masterful stuff there👍 and good clear photography 👍👍
Good to see the Atlantic Challenger. Many years ago a colleague and I did the COMMS system design for the original😊
Love the Minions and floating 'crapper', some imaginative folks about 😁
Cheers, Doug 😎
Lubię to
CB90Kapitan8 lat temu
Very high standard of models, I have looked on the their face book page and there is another event at the location next year on 30th May 2019. I may just get there, as I often go to Austria normally around St Wolfgang see.
Lubię to 2
Polubione przez marky and figtree7nts

Ronald

Admirał floty 8 lat temu

1 / 1

Marblehead all set to go

The owners of this sailboat are putting it in the water today after nearly a year in the repair shop. Should go like a graceful greyhound.

I will post more photos as they come to me.

#marblehead #sail #sailboat

Polubione przez jacko

lesliebreame

Starszy bosman 1 klasy 8 lat temu

JANE

Duncan steaming his live steam Chart Steam Toys paddle steamer at Landacre Bridge Devon

#steam #paddle steamer

Polubione przez Brightwork and Helineil and

3 komentarzs

lesliebreameStarszy bosman 1 klasy8 lat temu
yes, my mate has added a lot of weight on top compared with the original so consequently has ended up a bit lower in the water. Bob was firing up his Explorer next to me and couldn't get the radio to work as he had plugged the servo into the wrong slot!!
Lubię to 1
Polubione przez RNinMunich
figtree7ntsAdmirał8 lat temu
Very nice, really like the live steam!
Lubię to

MODEL BOATS WEBSITE

Najnowsze z galerii