Well, after the lovely reception of my HMCS Snowberry - which has been in the wars after a collision, now repaired and upgraded - now with a smoker and lighting - I chanced upon another 1/72 Revell Corvette, so taking everything I had learned in making Snowberry, I thought I would apply myself and see what I could do for a sister ship - the part-built kit - an eBay find - came with a few options for the decals, one of which was HMS Campanula, so the task was set!

Campanula has some differences to Snowberry, a diferent radar tower, different bridge supports - 2 x beams instead of 3 - different layout to the carley floats, an extra flagstaff on the funnel and a diferent bandstand edging for the rear pompom, so some scratchbuilding to fashion the diferences, as well as replacing a few missing parts.

The pics show it as it arrived, then the scratchbuilt carley float supports, the whaleboat runout on the davits, the bandstand alteration, the upgraded front gun, flota nets, navi and interior lights and an overview of the progress...

I am hoping to have her finished this week, and the crew painted and affixed, ready for her maiden voyage at Bury Lido next Sunday, fingers crossed!

Anyhows, hope you like her!

More great photos in this series taken by my friend at Albert Park Lake in Melbourne. These of my P28 - Ensign Simitzopoulos. Great wave patterns. These photos were all poster size in detail. I have had to shrink them to get them posted here. This boat is in my harbour.

The 1/35 scale boat is scratch-built, mainly from Balsawood and marine ply with a fibreglass covering. The guns can elevate and rotate. The radar units both rotate and there are LED navigation lights that I forgot to turn on. There is also a flashing red LED strobe warning system. It needs a little work to get the 4 LEDs a bright brighter.

Have just brought this vessel, Well made and light. it is of show quality complete with working navigation lights and blue beacons.
Rather fast too

Our club's 2nd annual "Light up the night" evening sail with lights on. The weather co-operated so it was dry and balmy after the sun went down. Lots of spectators on hand to enjoy the spectacle. Some boats were lit up like Christmas trees but others had the bare minimum navigation lights; at times navigating was a challenge.

Original design "Express Cruiser" type boat. Old home-made fiberglass hull built in UK in the 1970s and rescued from previous owner's garage. Model built during April-July 2015. Approx. 1/24 scale. in trying to emulate a Bertram Bahia Mar boat, I ended up with an originally fictitious design. Real life boat could be a 32-footer (9.75m) yacht. 3mm 9v LED navigation lights system. Runs on Mtroniks G2 3A Hyper BEC 6-12V 15A Constant controller, Biao123 A2122 brushless motor, and a NiMH 10.8v battery.

With my boats getting routinely stranded in the middle of nowhere, I felt compelled to commission a rescue vessel and "Triton" was born. "Triton" is a Springer-type tug push boat. With a hull and superstructure consisting of an “Indiana” style command cabin, it was built using a pretty basic birch plywood American kit designed for swimming pool water polo. Kit altered to resemble a fictitious Salvamento Marítimo (Spanish Coast Guard) unit following Salvamento Marítimo’s actual boat markings. Equipment and deck layout inspired on actual Springer tug push boats supporting larger vessels and barges found in US and European ports and rivers. Model built during September – October 2015. Approx. 1/18 scale. Real life boat could be a 30-footer (9.14m) vessel. Equipped with 9v LED navigation lights and sound system. Powered by an HPI Racing 1145 Gt 550 Motor, NiMH 7.4v battery, a 3-bladed 44mm propeller, and a 6-12V 320A RC Ship & Boat R/C Hobby Brushed Motor Speed Controller.

Altered Krick Lisa M model kit seeking realism. inspired on 1970s 40, 42 and 43 Hatteras, Uniflite and Viking Double Cabin American yachts. 9v LED navigation lights system. Approx. 1/20 scale. Real life boat could be nearly 39 x 13.7 feet. Similar real-life Hatteras 40 Double Cabin yacht measured 41 x 13.7 feet. Runs with NiMH 9.4v battery, an HPI Racing 1145 Gt 550 Motor 14.4V, and a 40mm 3 blade propeller.😁

Purchased on well known auction site. Boat very dusty/dirty but sound. it is from a Robbe kit that was around about 10 years ago and has timber decking, built-in auxiliary motor, navigation lights, etc. A deep clean followed by a re-paint of the superstructure, rub the decking down and varnish, followed by a complete rub down and re-paint of the hull brought her back to a fine yacht. She is about 40 inches in length and sails beautifully and has great presence on the water.

This 1/12 scale model is based on the Aerokits Solent Class lifeboat. Over the past 5 months it has been under going a major refit. I originally built the boat about 35 years ago and got the "bug" again last September. I've done the best I can to make a silk purse out of a sows ear.

Its powered by two MFA Torpedo 800 electric motors. power comes from two lead acid batteries, each rated at 12v 7Ah. Control is provided by two Mtroniks Tio ESC. The twin spade rudders are linked to one servo. Each ESC has its own receiver. I found that one receiver, using a Y lead, could not continuesly keep the two ESC supplied with a signal and they kept going into Failsafe mode alternately. I got round it by binding two receivers to the one transmitter. Within the engine compartment is an automatic bilge pump. Two probes detect if/when the water level rises to a certain amount in the bilge and activates the pump.

The model has working radar scanner , navigation lights, search light and blue flashing light.

If you want to see the boat in action please go to my You Tube page at https://www.youtube.com/user/coljacktonvale

Hull hollowed out and some bits from a static display model, based on several photo's of Greek fishing boats, Fish boxes from Coffee shop stirrers, Fish from long grain rice, Crew from Pound shop (Soldiers chopped & reshaped. ) She sails fairly well on first trial at Weymouth & Portland MBC, Miles Cross Farm lake .

Spec: M'tronics Vision 400 brushed motor, M'tronics 15a ESC, 12v SLA battery, 3 blade 30mm Prop. with Led Navigation and deck lights.

Chris

Here is a Graupner Bremen 9 converted to represent a UK Police boat. She is called DEVA which is the Roman name for the county capital of Cheshire - Chester.

If the Cheshire Constabulary owned a vessel of the size of the original Bremen 9, I am reliably informed that the 'Battenburg' and transom diagonal stripes would be correct. The 'BA 07' lettering on the superstructure is also the correct national and regional code for the Cheshire Constabulary. The constabulary crest on the cabin doors however has now been superseded by a more modern constabulary logo that looks sh1te.
The RIB provided with the kit is too small and in my opinion not to scale; I will replace it at some point. The light bar and all other blue and navigation lights work off 9v batteries.
Chris M

This was scratch built apart from the fibre glass hull which I purchased.
Model is 65" long with a beam of 10". Power is by electric running via a gearbox at 300 rpm. Ihave taken almost 2years to complete the model working most days on it. Attention to detail was the order of the day.
I am using a Planet T5 Tx and Rx, 5 channels. I have a smoke generator pushing steam out of the twin funnels,synchronised to forward speed, faster the revs, faster the steam. Conventional rudder operation.
Have an operating Radar, ships horn, simulated steam noise varies as speed is altered, full navigation lights,all cabin lights can be switched on and to keep the 106 passengers happy I have a Banjo Band playing to complete the scene. Have sailed it recently at Peterborough and performs really really well. Have to say it tends to attract a lot of interest.
I am now constructing the Ayton Cross tug in 1:32 scale, with all the detail I want.Plan is to tow the Jeanie Deans around when completed as well assailing her