Katalog portów

Italeri Vosper MTB. Converted to RC

Wystawione przez Trident73 ·

Specyfikacje

Długość łodzi
22" (55.88 cm)
Typ silnika
Brushless
Typ napędu
Direct
Śruby
Single
Rodzaj akumulatora
LiIon
Pojemność akumulatora (mAh)
284 mAh
Typ śruby
3 Blade
Rozmiar śruby
325mm

Zdjęcia

O tej łodzi

Took a couple of years to figure this one out. Cut part of the deck to make it removable and then inside (before I glued the rest of the deck on) I made battery trays / motor mount etc from GRP sheet. Small 1400kv brushless motor and a 3blade 25mm brass prop. (It does a very scale 200mph at full chat)😁
The mast is GRP sheet as well with some of the kit parts added. The masts fore and aft are brass tube. I did all that to make them more robust to the odd knock.

Komentarze

  1. johnf
    Bosman szkolny
    Many thanks. I have this very model although in a less than perfect state.

    Your excellent pictures will certainly help my rc. Conversion!

    Dr John. F. Leeds and Bradford. MBC. 😀😀😀😀
    Polubione przez hermank and chugalone100 and
  2. Trident73
    Porucznik podporucznik
    Hi chugalone. That is correct and it is a bit of a drawback with this one in that there are no coamings. Once I had cut out the deck (hatch) I added a framework of grp sheet for the hatch to sit back on. Unless it is flat calm then it does tend to get a bit of water in. One of the members at my club suggested adding a film of vaseline to the area where the hatch sits in order to prevent water ingress. Will try that the next time I take her out.
    Polubione przez AlessandroSPQR and chugalone100
  3. chugalone100Silver
    Kontradmirał
    It also will be super to see your entire building process.
    I have an M.S.A 563/568 with crew that maybe I try to do what you did.
  4. chugalone100Silver
    Kontradmirał
    Trident
    You have accomplished an excellent job well done on your vessel.
    Very detailed.
    I can’t wait till you get her on the water.
    One thing I saw in your pictures is that you have no coamings to prevent the water from coming in.
    Maybe I missed something and you do have a tight way to prevent that.😎
    Polubione przez AlessandroSPQR

Delete this post?

Zostanie usunięte z serwisu.

Odrzucić tę wersję roboczą?

Twój szkic zostanie usunięty i nie można go odzyskać.

Masz niedokończony szkic

Co chcesz z tym zrobić?