Katalog portów
Springer #4 USACOE Stoplog
Specyfikacje
- Długość łodzi
- 14" (35.56 cm)
- Typ silnika
- Brushed
- Typ napędu
- Direct
- Śruby
- Single
- Rodzaj akumulatora
- LiIon
- Pojemność akumulatora (mAh)
- 286 mAh
- Typ śruby
- 3 Blade
- Rozmiar śruby
- 40mm
- Czas pracy
- 358 min
- Prędkość modelu
- 363 km/h (225.6mph)
Zdjęcia
O tej łodzi
This is my fourth Springer tug. It was built to resemble the U.S. Army's Corps of Engineers stoplog tug located at Little Goose Dam in Washington State. The scale is about 1/17. The model had to be modified slightly because the length to beam ratio between the real tug and a Springer are slightly different. This keeps the model within the Springer class rules.
Polubione przez
Ładowanie…
Komentarze
Zaloguj się skomentować.
I built four Zippkits Springers and did the same hull finish for each. Sanded, coated with spar varnish (brushed on) filled voids with Testors model filler (JB Weld, or others should work), sanded, filled, varnished again until finish was acceptable. Sprayed on paint, usually Rustoleum (sometimes Walmart brand). For hulls and decks I go with the standard hardware store spray paints, no need to go expensive. Protects the hull just fine!
Hope this helps.
Lew 😮