Komentarze

Zaloguj się skomentować.

1. Fishercat🇺🇸Bronze

   Starszy bosman 1 klasy·1 miesiąc temu

   @DWBrinkman hijack away!

   Polubione przez hermank and DWBrinkman Zobacz wszystko
2. DWBrinkman🇺🇸Bronze

   Kontradmirał·1 miesiąc temu

   For those who have inquired.
   My Seguin was originally posted for sale @ $500.00, and was lowered to $250.00 after 2 weeks with no sale.
   I pointed out what I considered necessary to make the boat usable again.
   I respectfully offered $100.00, and she countered at $120.00, which I accepted.
   At this price, I have room to make the necessary updates and retro fixes and still be in the boat at what I hope to be a reasonable cost.
   I didn't NEED another boat, but I've always liked the looks of the Seguin. And this one appears to need minimal investment to make it "right".
   Alessandro, yes, I intend to leave it in the natural wood finish.
   Dave B
   PS Fishercat, I apologize for hijacking your post ... I didn't think it would expand the way it did.

   Polubione przez RNinMunich and hermank and 2 others
3. Ronald🇨🇦

   Admirał floty·1 miesiąc temu

   @DWBrinkman
   How much did you pay for this fine model?
   
   You find a number of nice models up there in your area.
   
   Estate sales and Marketplace

   Polubione przez DWBrinkman and hermank Zobacz wszystko
4. AlessandroSPQR🇮🇹

   Admirał floty·1 miesiąc temu

   @DWBrinkman
   Oh I forgot Dave, you should also complete the system to lower the lifeboat into the water.
   You need blocks and cordage.
   If you want detailed directions on this they can give it to you, in any case I like how Fishercat made them and you can copy from his photo.
   In the Danish ship collections I posted a few days ago there may be many useful images that are just right for you.

   Polubione przez DWBrinkman and hermank Zobacz wszystko
5. AlessandroSPQR🇮🇹

   Admirał floty·1 miesiąc temu

   @DWBrinkman
   Hi Dave, I would have followed Fishercat's advice as well.
   You're lucky there are no deadeyes for tensioning the shrouds. Those were old, somewhat complicated systems for tightening the rigging—though I'm sure you're already familiar with them.
   You're fortunate to be able to use steel turnbuckles (in modeling, other alloys or metals might be used).
   In my opinion, there is absolutely no need to tension them to the absolute maximum. In real life, this was done because the shrouds actually held the masts in place and provided stability, but in modeling, it's different. In modeling, the shrouds serve a purely aesthetic purpose—simply to recreate the model faithfully; in fact, as you can see, the mast can be fixed and held in position even without them.
   Naturally, you shouldn't leave them slack or loose, as that would look bad.
   Keep in mind that temperature fluctuations and varying humidity levels significantly affect shroud tension if they are made of hemp or plant fibers—I speak from personal experience here.
   Fishercat used brass, so he doesn't have that issue. An excellent solution.
   
   As I understand it, Fishercat pointed out a major issue: you have to remove the shrouds to open the deck hatch. One solution was likely using small elastic bands.
   Alternatively, to avoid using elastic bands, you could use open hooks (provided they are very strong). In that case, however, you wouldn't be able to tension the shrouds to the maximum.
   
   How much did you pay for this ship model? If you'd like to share that—otherwise, don't worry about it; just ignore the question.

   Polubione przez DWBrinkman and hermank Zobacz wszystko
6. Fishercat🇺🇸Bronze

   Starszy bosman 1 klasy·1 miesiąc temu

   @DWBrinkman I don't recall what the instructions said, but here's how I did it. Small turnbuckles and brass wire for the shrouds that I turned into "rope" by spinning it in an electric drill (this was 1991 - I've learned a bit since). I think smaller turnbuckles would be perfect. Note that they ALL have to come off to remove the cabin - likely hence the rubber bands.

   Polubione przez hermank and AlessandroSPQR and 1 other
7. DWBrinkman🇺🇸Bronze

   Kontradmirał·1 miesiąc temu

   I lost the battle with my better judgment.....
   Last night, after a couple of glasses of wine, I made a polite but lowball offer on the Seguin listed on FB Marketplace.
   Within minutes, my offer was accepted, if I could pick it up (100 miles away) by 10 AM today.
   I'm now the proud owner of a seemingly well-built 50-year-old build (or so) Seguin.
   It will need a new receiver and speed control, but I believe the servo and motor will be OK.
   My dear wife asked, "And where are you going to put THAT one?"
   Dave B
   PS The shrouds and stays are way too short to reach the hooks on the deck. It appears the original owner used rubber bands to bridge the gap.
   Can somebody who has built one, or has plans, tell me how the shrouds and stays were meant to be fastened?

   Polubione przez AlessandroSPQR and Fishercat and 2 others
8. Fishercat🇺🇸Bronze

   Starszy bosman 1 klasy·1 miesiąc temu

   @DWBrinkman FB isn't showing that one to me - likely too far away. I know your pain! My spouse is not thrilled with the ummm ... expansion of the fleet lately (not to mention the workshop), but we have room so she's not giving me too much grief.

   Polubione przez AlessandroSPQR and hermank and 1 other
9. AlessandroSPQR🇮🇹

   Admirał floty·1 miesiąc temu

   Hi Fishercat, it's a beautiful ship model and certainly deserves more than one photo.

   Polubione przez hermank and Fishercat Zobacz wszystko
10. ColRay🇦🇺

    Komandor porucznik·1 miesiąc temu

    Beaut tug Col

    Polubione przez hermank and Fishercat and 1 other