Komentarze

Zaloguj się skomentować.

1. DWBrinkman🇺🇸Bronze

   Kontradmirał·5 lat temu

   Great Build! SO much fine detail, it's amazing. I don't think I have enough courage to attempt something like that as my first full build. Congrats on a job well done.

   Polubione przez Martin555
2. Newby7🇨🇦Bronze

   Admirał floty·5 lat temu

   First boat truly a fine build .Looks good on the water.
   Rick

   Polubione przez Martin555
3. Colin H🇬🇧Silver

   Admirał floty·5 lat temu

   Good morning and thanks for the information, it sounds like you are getting cavitation caused by to high a speed at prop.
   Cheers Colin.

   Polubione przez Martin555
4. bombero🇪🇸

   Sierżant sztabowy·5 lat temu

   Colin,
   yes it is a brushless combonation bought as a package from cornwall
   Propellor is a 40mm 3 bladed alloy, I regreased the shaft and put prop on wrong way( now corrected) and boat reversed well but would not go forward have tried altering pitch which improved reverse but was a test and will look for a better Prop
   Ballast is wheel balances also well cleaned and put into sealed plastic bags so can be moved as necessary, dont forget this is my first completed boat.
   When I was a child I started a wooden boat but did not complete it? did a 5 year apprentiship as a fitter and turner before joining Fire service so can concentrate on finer limits on fittings!

   Polubione przez Colin H and Martin555 Zobacz wszystko
5. Colin H🇬🇧Silver

   Admirał floty·5 lat temu

   Excuse my ignorance, but is that a brushless setup.
   And which type of prop are you using, mine currently has a 35mm 4 blade brass prop. Motor not fitted yet but will hopefully be using vintage decaperm and 6 volt sla.
   My preferred ballast is children's play sand fully dried and put into resealable freezer bags usually100 grams each.
   That allows me to shift the ballast to wherever its needed.
   Cheers Colin.

   Polubione przez Nerys and Martin555 Zobacz wszystko
6. bombero🇪🇸

   Sierżant sztabowy·5 lat temu

   Colin,
   used a motronic d2386 motor with a hydra32 g2 ESC.
   Found I had to put in at least 5 KG balast (courtesy of local tyre fitters), need to change propellor as one supplied drive well forward but useless in reverse.

   Polubione przez Colin H and Martin555 Zobacz wszystko
7. Yoda🇬🇧

   Starszy marynarz·5 lat temu

   Nice build, Enjoy sailing it. 👍

   Polubione przez Martin555
8. Brucep🇬🇧

   Starszy bosman 1 klasy·5 lat temu

   Enjoy sailing her, it’s a lovely model to sail

   Polubione przez Martin555
9. Nerys🇬🇧

   Admirał floty·5 lat temu

   That's quite an ambitious model for your first build. Very well done. Have lots of fun sailing her.
   
   Cheers, Nerys

   Polubione przez Martin555
10. Ronald🇨🇦

    Admirał floty·5 lat temu

    Nice build, looks very stable on the water. Enjoy sailing it.

    Polubione przez Martin555